FeaturesSpecificationsCertifications

VCE Series Energy Storage System Cooling is designed with integrated frequency conversion, featuring high energy efficiency, easy installation, intelligent control, and high safety and reliability. This series of products are classified into constant temperature type and cooling type by function, and into wall-mounted, ground-mounted, and ceiling-mounted by mounting pattern. 

Convenient and reliable

• Integrated design, plug and play, complete isolation from inside and outside.

• Open protocol, support control according to cell temperature, more flexible on-site application.

• Independent cooling and heating set point control, closer to the actual operation of the battery.

• High protection level - IP55 protection level to ensure the dustproof and waterproof reliability of the chassis.

• The exterior of the chassis is sprayed with outdoor powder to improve the weather resistance and corrosion resistance of the unit.

• The EC fan has a large air volume and high residual pressure design, which can cope with the situation of adding air ducts on site.

Adapt to local conditions

• Support multi-scene installation: wall-mounted, floor-standing, ceiling-mounted, indoor/outdoor.

Energy saving and environmental protection

• True frequency conversion, more energy efficient, R410A environmentally friendly refrigerant.

Intelligent control

• Self-diagnosis, fault warning, rotational networking.

• Automatically adjust the operating status according to the cell temperature.

Easy to install

• Can realize full front maintenance, easy to operate.

• Product integrated design, easy to install, easy to transport in centralized box or wall-mounted installation, easy to operate, no complicated operation, it can run automatically when it is powered on.

• The installation of the air conditioner does not intersect with the internal construction of the container to achieve more efficient installation and commissioning.

• Provide alarm signal and digital communication interface, when an abnormality occurs, the alarm signal will be output, and monitoring, control, etc. can be realized through the communication interface.

Rigorous testing

• Condensation verification.

• Full safety testing.

• High pressure spray waterproof test.

• Frequent start and stop to verify oil return and liquid return.

• Piping stress, piping vibration verification.

• Wide voltage (at least ±15% fluctuation range) operation.

• Severe high temperature (at least 43°C), low temperature (-20°C) operation verification.